Aruba AP 535 indoor Access point
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

Aruba AP 535 indoor Access point

Available: In Stock
₹79,999.00 ₹85,999.00
Image
  • Order within
Secure

Aruba's Wi-Fi 6 access points provide high-performance connectivity for IoT and mobility. 2.97Gbps combined peak data rate gives enterprises the speed and reliability they need.


▶ KEY POINTS:


 ➢ Combined peak data up to 2.97Gbps 

 ➣ Security with Wi-Fi Protected Access 3  and Enhanced Open 

 ➢ Integrated technology to resolve issues with sticky clients on Wi-Fi 5 & 6

 ➣ Enhance multi-user efficiency with Orthogonal frequency-division multiple access and Multi User-MIMO 

➢ Supports BLE 5 and Zigbee for IoT

➣Accurate indoor location measurement using embedded ranging

SPECIFICATION:


▶ PRODUCT FEATURES:


INCREDIBLE EFFICIENCY

➢ Enhance Wi-Fi efficiency and reduce airtime contention between clients to enhance user experience.

➣ It includes OFDMA, bi-directional MU MIMO, and cellular optimization. 

 ➢ Groundbreaking wireless capabilities include four spatial streams and 160MHz channel bandwidth.

Concurrent client channel per radio

Wifi Priority

1 @ time 

Wifi 6 in 20 MHz

Up to 9 @ time

Wifi 6 in 40 MHz

Up to 18  @  time

Wifi 6 in 80 MHz

Up to  37 @  time

OFDMA BENEFITS

Multiple wifi 6 clients can be handled on each channel. Sub-carriers or resource units (RUs) share channels for optimized channel utilization.

Wi-Fi 6  &  MU-MIMO


Aruba's patented ClientMatch technology matches Wi-Fi 6 devices with best access point. It guides mobile devices to best AP based on bandwidth, applications, and traffic type.

Bi-directional  (MU-MIMO)

These networks combine MU-MIMO downlinks with spatial streams uplinks, just as in Wi-Fi 5 (802.11ac Wave 2). By doubling number of clients sending traffic, it enhances client-AP spatial stream diversity.

IOT Capabilities:

 ➢ Includes Bluetooth 5.0 and Zigbee (802.11.5.4)

➣ Service deployment & management for IoT locations.

➢ Improves airtime contention and power efficiency with TWT ( Target Wake Time )

▶ SECURE INFRASTRUCTURE

A Secure Fabric protects authentication and wireless traffic. A few capabilities are :

WPA3: Stronger encryption and authentication in latest WPA release. 

Enhanced Open: Passwords and data are automatically encrypted for users connected to guest networks.

WPA2-MPSK: Simpler passkey management for changing WiFi passwords.

Important note: Clearpass policy manager required.

VPN Tunnels: Mobile controllers act as  VPN concentrators to establish secure SSL/IPSec VPN tunnels.

▶ OTHER WIFI BENEFITS:

➢ Transmit beamforming: Ability to increase range and reliability of signals being transmitted.

➣ Passpoint Wi-Fi  (2.0): Transfers data seamlessly from cellular to Wi-Fi.

➢ Dynamic Frequency Selection (DFS): For maximizing use of RF waves spectrum

➣ Cyclic Delay or Shift Diversity: Improves performance of RF transmissions during downlink phase.

➢ STB: Enhances range and reception of signal.

▶ OTHER FEATURES:

Wifi Antenna:

➢ Downtilt dual-band omnidirectional antennas support 4x4 MIMO and achieve 3.5 dBi peak gain at 2.4GHz & 5.4 dBi at 5GHz.

➣ A horizontal ceiling mount orientation of AP is optimal for built-in antennas. 

➢ It is best to tilt down 30 degrees for maximum gain.

 Horizontal planes of antenna azimuth (0 degrees) and downtilt (30 degrees)

Wi-Fi at 5.5GHz (antennas 0, 1, 2, 3)
Wi-Fi at 2.45GHz (antennas 0, 1, 2, 3)

In a vertical plane (elevation), AP rotated 0 and 90 degrees (all antennas averaged).

Wi-Fi at 2.45GHz (antennas 0, 1, 2, 3)
Wi-Fi at 5.5GHz (antennas 0, 1, 2, 3)

 Note: When MIMO radio antenna patterns are combined, peak gain 1.9dBi at 2.4GHz, and at 5GHz it is 3.5dBi.

Ethernet  & USB Port:

➢ HPE smart rate RJ45 port negotiates a 5 GBit/s speed

➣ Auto-sensing of link speed (1000,100,2500 and 5000 BASE-T) &  MDI/MDX.

➢ Specifications for NBase-T and 802.3bz define 2.5 and 5 Gbps speed.

USB Port: (2.0): Supports 1A and 5W of current devices attached to it.

Visual indicators: Identifies system status with dual multi-color LEDs.

Reset Button:  Reset factory settings, LED control (on/off) 

 

Transmit Power (IoT)

➢ BLE (5.0): 8dBm of transmitting power (cls 1), -95dBm of receiving power.

➣ Zigbee (802.15.4): Transmit power up to 8 dBm, receive power up to 99 dBm.

➢ Downtilt is approximately 30 degrees, and it offers 3.1dBi gain.

Mean Time Between Failure (MTBF): 995,000 hours (~114 years) at +25C operating temperature.

NOTE: Mean time to failure (MTTF) is a maintenance metric that measures how long it takes a non-repairable asset to fail.

▶ POWER SOURCE AND CONSUMPTION:

➢ Both direct DC &  Power over Ethernet support

➣POE passes on twain Ethernet ports as AP can prioritize or combine power supplies.

➢ When dual DC power and POE power is available, Direct Current  takes precedence.

➣ With DC, 802.3bt (cls 5), and two x 802.3at (cls 4) electricity, the unit is unrestricted.

➢ USB port and Ethernet ports are disabled when energized by one x 802.3 at (cls 4) POE with IPM disabled. 

➣ When IPM is enabled in AP unrestricted mode, dynamic restrictions depend on POE budget & power. 

Note: Restrictions and orders are programmable.

▶ DEVICE REQUIREMENT

Operating systems: ArubaOS

Software version: Aruba InstantOS 8.5.0.0 ( With Some Restriction)

Note: Without restriction use 8.6.0.0 or later.


▶ MECHANICAL SPECIFICATIONS:-

Without Mount brack:

Dimensions - 240mm (W) x 240mm (D) x 57mm (H) 

Weight - 1,270g


With Mount brack:

Dimensions - 285mm (W) x 300mm (D) x 105mm (H)

Weight - 1,930g


Aruba's Wi-Fi 6 access points provide high-performance connectivity for IoT and mobility. 2.97Gbps combined peak data rate gives enterprises the speed and reliability they need.


▶ KEY POINTS:


 ➢ Combined peak data up to 2.97Gbps 

 ➣ Security with Wi-Fi Protected Access 3  and Enhanced Open 

 ➢ Integrated technology to resolve issues with sticky clients on Wi-Fi 5 & 6

 ➣ Enhance multi-user efficiency with Orthogonal frequency-division multiple access and Multi User-MIMO 

➢ Supports BLE 5 and Zigbee for IoT

➣Accurate indoor location measurement using embedded ranging

SPECIFICATION:


▶ PRODUCT FEATURES:


INCREDIBLE EFFICIENCY

➢ Enhance Wi-Fi efficiency and reduce airtime contention between clients to enhance user experience.

➣ It includes OFDMA, bi-directional MU MIMO, and cellular optimization. 

 ➢ Groundbreaking wireless capabilities include four spatial streams and 160MHz channel bandwidth.

Concurrent client channel per radio

Wifi Priority

1 @ time 

Wifi 6 in 20 MHz

Up to 9 @ time

Wifi 6 in 40 MHz

Up to 18  @  time

Wifi 6 in 80 MHz

Up to  37 @  time

OFDMA BENEFITS

Multiple wifi 6 clients can be handled on each channel. Sub-carriers or resource units (RUs) share channels for optimized channel utilization.

Wi-Fi 6  &  MU-MIMO


Aruba's patented ClientMatch technology matches Wi-Fi 6 devices with best access point. It guides mobile devices to best AP based on bandwidth, applications, and traffic type.

Bi-directional  (MU-MIMO)

These networks combine MU-MIMO downlinks with spatial streams uplinks, just as in Wi-Fi 5 (802.11ac Wave 2). By doubling number of clients sending traffic, it enhances client-AP spatial stream diversity.

IOT Capabilities:

 ➢ Includes Bluetooth 5.0 and Zigbee (802.11.5.4)

➣ Service deployment & management for IoT locations.

➢ Improves airtime contention and power efficiency with TWT ( Target Wake Time )

▶ SECURE INFRASTRUCTURE

A Secure Fabric protects authentication and wireless traffic. A few capabilities are :

WPA3: Stronger encryption and authentication in latest WPA release. 

Enhanced Open: Passwords and data are automatically encrypted for users connected to guest networks.

WPA2-MPSK: Simpler passkey management for changing WiFi passwords.

Important note: Clearpass policy manager required.

VPN Tunnels: Mobile controllers act as  VPN concentrators to establish secure SSL/IPSec VPN tunnels.

▶ OTHER WIFI BENEFITS:

➢ Transmit beamforming: Ability to increase range and reliability of signals being transmitted.

➣ Passpoint Wi-Fi  (2.0): Transfers data seamlessly from cellular to Wi-Fi.

➢ Dynamic Frequency Selection (DFS): For maximizing use of RF waves spectrum

➣ Cyclic Delay or Shift Diversity: Improves performance of RF transmissions during downlink phase.

➢ STB: Enhances range and reception of signal.

▶ OTHER FEATURES:

Wifi Antenna:

➢ Downtilt dual-band omnidirectional antennas support 4x4 MIMO and achieve 3.5 dBi peak gain at 2.4GHz & 5.4 dBi at 5GHz.

➣ A horizontal ceiling mount orientation of AP is optimal for built-in antennas. 

➢ It is best to tilt down 30 degrees for maximum gain.

 Horizontal planes of antenna azimuth (0 degrees) and downtilt (30 degrees)

Wi-Fi at 5.5GHz (antennas 0, 1, 2, 3) Wi-Fi at 2.45GHz (antennas 0, 1, 2, 3)

In a vertical plane (elevation), AP rotated 0 and 90 degrees (all antennas averaged).

Wi-Fi at 2.45GHz (antennas 0, 1, 2, 3) Wi-Fi at 5.5GHz (antennas 0, 1, 2, 3)

 Note: When MIMO radio antenna patterns are combined, peak gain 1.9dBi at 2.4GHz, and at 5GHz it is 3.5dBi.

Ethernet  & USB Port:

➢ HPE smart rate RJ45 port negotiates a 5 GBit/s speed

➣ Auto-sensing of link speed (1000,100,2500 and 5000 BASE-T) &  MDI/MDX.

➢ Specifications for NBase-T and 802.3bz define 2.5 and 5 Gbps speed.

USB Port: (2.0): Supports 1A and 5W of current devices attached to it.

Visual indicators: Identifies system status with dual multi-color LEDs.

Reset Button:  Reset factory settings, LED control (on/off) 

 

Transmit Power (IoT)

➢ BLE (5.0): 8dBm of transmitting power (cls 1), -95dBm of receiving power.

➣ Zigbee (802.15.4): Transmit power up to 8 dBm, receive power up to 99 dBm.

➢ Downtilt is approximately 30 degrees, and it offers 3.1dBi gain.

Mean Time Between Failure (MTBF): 995,000 hours (~114 years) at +25C operating temperature.

NOTE: Mean time to failure (MTTF) is a maintenance metric that measures how long it takes a non-repairable asset to fail.

▶ POWER SOURCE AND CONSUMPTION:

➢ Both direct DC &  Power over Ethernet support

➣POE passes on twain Ethernet ports as AP can prioritize or combine power supplies.

➢ When dual DC power and POE power is available, Direct Current  takes precedence.

➣ With DC, 802.3bt (cls 5), and two x 802.3at (cls 4) electricity, the unit is unrestricted.

➢ USB port and Ethernet ports are disabled when energized by one x 802.3 at (cls 4) POE with IPM disabled. 

➣ When IPM is enabled in AP unrestricted mode, dynamic restrictions depend on POE budget & power. 

Note: Restrictions and orders are programmable.

▶ DEVICE REQUIREMENT

Operating systems: ArubaOS

Software version: Aruba InstantOS 8.5.0.0 ( With Some Restriction)

Note: Without restriction use 8.6.0.0 or later.


▶ MECHANICAL SPECIFICATIONS:-

Without Mount brack:

Dimensions - 240mm (W) x 240mm (D) x 57mm (H) 

Weight - 1,270g


With Mount brack:

Dimensions - 285mm (W) x 300mm (D) x 105mm (H)

Weight - 1,930g


Shipping 
Once the order for the listed product has been placed by online customers, our order processing team will verify the order confirmation with customer. And once the order has been verified, it will be packed, processed for shipping and available dispatch in maximum 0-1 days i.e., within 24 hours. 

Our courier partners will come and pickup the processed orders and send to the concurrent customer locations. The product will be in transit for 2-4 working days maximum and delivers at the earliest. We serve nearly 22000+ pin codes supporting most of Indian location with our multiple courier partners based on price, distance and time of delivery. All products sent from our warehouses are properly packed, labelled and goes for quality check. 

Once the product reaches the customer location, our delivery partners will come and deliver the product at door step, in case if the customer is not available at the location, they will contact the customer to the mentioned mobile number for the reattempts. A maximum of 3 reattempts will be provided for a successful product delivery and if the customer is not available at the desired location, the product will reach to the origin warehouse safely where it was initially dispatched and process the payment as refund to customer if the product is booked as prepaid mode.  

Returns 
Our policy lasts 7 days. If 7 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. 

To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. 

Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases. 

Additional non-returnable items: 
- Gift cards 
- Downloadable software products 
- Some health and personal care items 

To complete your return, we require a receipt or proof of purchase and the opening video, with the following customer should raise a ticket in our support panel. Our returns evaluation team will verify the request and process for a return. Also, in meanwhile, Please do not send your purchase back to the manufacturer. 

There are certain situations where only partial refunds are granted (if applicable) 
- Book with obvious signs of use 
- CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened 
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error 
- Any item that is returned more than 10 days after delivery 

Refunds (if applicable) 
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. 
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days not maximum to 14 working days. 

Late or missing refunds (if applicable) 
If you haven’t received a refund yet, first check your bank account again. 
Then contact your credit card company, it may take some time before your refund is officially posted. 
Next contact your bank. There is often some processing time before a refund is posted. 
If you’ve done all of this and you still have not received your refund yet, please contact us at support@grabnpay.in. 

Sale items (if applicable) 
Only regular priced items may be refunded, unfortunately sale items cannot be refunded. 

Exchanges (if applicable) 
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at support@grabnpay.in and send your item to: Grabnpay eCommerce Private Limited, A501, MJ AMADEUS LIFESTYLE, RAYASANDRA, 560099 Bangalore KA, India. 

Gifts 
If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you. 

If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and he will find out about your return. 

Return Shipping 
Once we approved your return request, you can expect the return pickup will happen within 1-3 business days from our delivery agent. Pack your return parcel with the original invoice and handover to our delivery agent.We are not charging return shipments from customers 

Depending on where you live, the time it may take for your exchanged product to reach you, may vary.